Solutions

VHF Transceiver for GMDSS Coast Station model KVHF-4010-50 with DSC module

The KVHF-4010-50 transceiver works in the maritime VHF frequency range from 156MHz to 162MHz and can deliver up to 50W of RF signal into a 50Ω load in transmission mode.

The KVHF-4010-50 transceiver uses up-to-date technologies and has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data input/output both for Voice and DSC fully compliant with the ED137-B standard (VoIP with SIP),
• LCD for local settings & monitoring as an option, Voice accessories for local use (microphones etc.),

Power also available :  40 & 25W

VoIP Operator Console

The VoIP Operator Console main features are:

• Friendly & Ergonomic Touch Screen Graphical User Interface
• VoIP based with SIP (ED137B compliant)
• Phone conference setup possibility
• DSC console in option
• Multi sites, Multi radios, Multi users possibilities
• Radio remote control & monitoring
• Suitable for MF, HF or VHF radios

Shared GMDSS Server for GMDSS  & NAVTEX system

The GMDSS Server is a software based solution acting as a central point for any GMDSS network. As a key component of the GMDSS network, the GMDSS server is specially designed for 24/24 hours and 7/7 days operations. In order to warranty such robustness, many key points are continuously considered since preliminary design:

• Robust and modular software design;
• Detailed logging of every operation (regular and abnormal);
• Strict checking of every inputs (configuration and Data);
• External User interface based on a Web Server;
• Redundancy and backup considered since first design;

Costal MF/HF Transmitter model KTX-2012-2000

The KTX-2012-2000 transmitter works in the MF/HF frequency range from 1.6 to 30MHz and can deliver up to 1 kilowatt PEP of RF signal into a 50Ω load. The KTX-2012-2000 transmitter uses up-to-date technologies and is from now ready for the incoming NAVDAT HF system:

• The RF signal is generated by a digital synthesizer with DSP and DDS,
• Use of last generation of MOS-FET solid-state power amplifiers,

The KTX-2012-2000 has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data intput for Voice, DSC and NAVTEX; it is fully compliant with the ED137-B standard (VoIP with SIP),

The KTX-2012-2000 is specially designed to be installed into the maritime coast station fulfilling the GMDSS requirements. It includes one 19″ – 24U cabinet (without option), the power supply, the synthesizer, the amplifier and the harmonic filter for an easy installation on site. The main power supply is single phase from 100/240VAC – 50/60Hz.

The KTX-2012-2000 transmitter can be used for Voice, DSC, NAVTEX ( 4 209.5kHz) or other purpose (USB, Digital Modulation etc.).

Costal MF/HF Transmitter model KTX-2012-5000

The KTX-2012-5000 transmitter works in the MF/HF frequency range from 1.6 to 30MHz and can deliver up to 1 kilowatt PEP of RF signal into a 50Ω load. The KTX-2012-2000 transmitter uses up-to-date technologies and is from now ready for the incoming NAVDAT HF system:

• The RF signal is generated by a digital synthesizer with DSP and DDS,
• Use of last generation of MOS-FET solid-state power amplifiers,

The KTX-2012-5000 has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data intput for Voice, DSC and NAVTEX; it is fully compliant with the ED137-B standard (VoIP with SIP),

The KTX-2012-5000 is specially designed to be installed into the maritime coast station fulfilling the GMDSS requirements. It includes one 19″ – 24U cabinet (without option), the power supply, the synthesizer, the amplifier and the harmonic filter for an easy installation on site. The main power supply is single phase from 100/240VAC – 50/60Hz.

The KTX-2012-5000 transmitter can be used for Voice, DSC, NAVTEX ( 4 209.5kHz) or other purpose (USB, Digital Modulation etc.).

Costal MF/HF Receiver model KRX-2072

The KRX-2072 receiver uses up-to-date technologies and has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data output for Voice, DSC and NAVTEX; it is fully compliant with the ED137-B standard (VoIP with SIP),
  LCD for local settings & monitoring as an option,
• Voice accessories for local use (headphones etc.).

VoIP Operator Console

The VoIP Operator Console main features are:

• Friendly & Ergonomic Touch Screen Graphical User Interface
• VoIP based with SIP (ED137B compliant)
• Phone conference setup possibility
• DSC console in option
• Multi sites, Multi radios, Multi users possibilities
• Radio remote control & monitoring
• Suitable for MF, HF or VHF radios

Costal MF/HF Transmitter model KTX-2012-1000

The KTX-2012-1000 transmitter works in the MF/HF frequency range from 1.6 to 30MHz and can deliver up to 1 kilowatt PEP of RF signal into a 50Ω load. The KTX-2012-1000 transmitter uses up-to-date technologies and is from now ready for the incoming NAVDAT HF system:

• The RF signal is generated by a digital synthesizer with DSP and DDS,
• Use of last generation of MOS-FET solid-state power amplifiers,

The KTX-2012-1000 has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data intput for NAVTEX; it is fully compliant with the ED137-B standard (VoIP with SIP),

The KTX-2012-1000 is specially designed to be installed into the maritime coast station fulfilling the GMDSS requirements. It includes one 19″ – 24U cabinet (without option), the power supply, the synthesizer, the amplifier and the harmonic filter for an easy installation on site. The main power supply is single phase from 100/240VAC – 50/60Hz.

The KTX-2012-1000 transmitter can be used for NAVTEX ( 4 209.5kHz) or other purpose (USB, Digital Modulation etc.).

Power also available : 2kW and 5kW.

Costal MF/HF Receiver model KRX-2072

The KRX-2072 receiver uses up-to-date technologies and has native IP capabilities with the following features:

• Control through a high level WEB server (both for settings and monitoring),
• High level Monitoring through SNMP (MIB supplied) as an option,
• Data output for NAVTEX; it is fully compliant with the ED137-B standard (VoIP with SIP),
  LCD for local settings & monitoring as an option,
• Voice accessories for local use (headphones etc.).